3D Innovations NC60 User Manual

The Xerox DocuPrint NC60 ColorLaserPrinterSystemAdministratorGuideVersion 1.0

Control Panel Features1-4❖DocuPrint NC60 System Administrator GuideThe Indicator LightsThe Control Panel contains six indicator lights. Table 1.1 desc

Print Menu1-94❖DocuPrint NC60 System Administrator GuideFault HistoryPrint a log of the printer’s last fifty faults.1. Press Menu Up or Menu Down unti

Print MenuChapter 1: Configuring the Printer❖1-95Disk DirectoryPrint a list of fonts and macros downloaded to the hard disk.This procedure does not li

Media Server Menu1-96❖DocuPrint NC60 System Administrator GuideMedia Server MenuUse the Media Server Menu to print from the Media Server. The menu hie

Media Server MenuChapter 1: Configuring the Printer❖1-97Table 1.19 Media Server Menu functionsMenu Item and Function Keystrokes DisplaySelect FileSele

Media Server Menu1-98❖DocuPrint NC60 System Administrator GuideSelect TraySelect the source tray from which the job is to be printed.The available val

Service MenuChapter 1: Configuring the Printer❖1-99Service MenuUse the Service Menu to generate printer reports and set service options. The menu hier

Service Menu1-100❖DocuPrint NC60 System Administrator GuideFigure 1.16 Service Menu hierarchyConfig SheetTest PatternsJob MenuPassword MenuTray MenuPC

Service MenuChapter 1: Configuring the Printer❖1-101Table 1.20 Service Menu functionsMenu Item and Function Keystrokes DisplayConfig SheetPrint a Conf

Service Menu1-102❖DocuPrint NC60 System Administrator GuideTest PatternsEnable printing of printer resident, PostScript test patterns.The available va

Service MenuChapter 1: Configuring the Printer❖1-103OHP ModeSet Overhead Projection mode to allow discrete selection of settings for fuser temperature

Control Panel FeaturesChapter 1: Configuring the Printer❖1-5The KeysThe Control Panel keypad consists of eight keys, identified with international sym

Service Menu1-104❖DocuPrint NC60 System Administrator GuideMargin LeftSet the left margin or horizontal displacement of the logical printed page versu

Service MenuChapter 1: Configuring the Printer❖1-105Cleaning CycleSelect an automatic cleaning cycle frequency, based upon the number of prints.The av

Service Menu1-106❖DocuPrint NC60 System Administrator GuideShow Page CountsDisplay summary page count data.The available values are:Total CountBlack C

Service MenuChapter 1: Configuring the Printer❖1-107CRU UsageDisplay CRU percentage of use data.The available values are:Black Dev. CartColor Dev. Car

Service Menu1-108❖DocuPrint NC60 System Administrator GuideFaults ActiveDisplay all active faults on the Control Panel display.The available values ar

Reset MenuChapter 1: Configuring the Printer❖1-109Reset MenuUse the Reset Menu to reset various printer functions. The Reset Menu only appears in the

Reset Menu1-110❖DocuPrint NC60 System Administrator GuideTable 1.21 Reset Menu functionsMenu Item and Function Keystrokes DisplayFactory DefaultsReset

Reset MenuChapter 1: Configuring the Printer❖1-111CRU ResetsReset the selected CRU.The available values are:COLOR DEVFUSER MODBLACK DEVPRINT DRUM1. Pr

Reset Menu1-112❖DocuPrint NC60 System Administrator GuideDisk InitializeInitialize the Hard Disk Drive.The available values are:YesNo*This function is

Chapter 2: Managing Printer Usage❖2-1Managing Printer Usage Chapter2Network Printer Services ... 2-

Control Panel Features1-6❖DocuPrint NC60 System Administrator GuideEnter• If the current display is a value for an item, pressing this key causes the

Network Printer Services2-2❖DocuPrint NC60 System Administrator GuideNetwork Printer ServicesTwo print service utilities are available for the install

CentreWare DPChapter 2: Managing Printer Usage❖2-3CentreWare DPCentreWare DP is a new generation of network print management software designed for the

CentreWare Internet Services2-4❖DocuPrint NC60 System Administrator GuideCentreWare Internet ServicesCentreWare Internet Services is an interactive se

Chapter 3: Using the Hard Drive❖3-1Using the Hard Drive Chapter3Hard Drive Considerations ... 3-2Disk

Hard Drive Considerations3-2❖DocuPrint NC60 System Administrator GuideHard Drive ConsiderationsIf you install the optional Hard Disk Drive on the Docu

Downloading Fonts and MacrosChapter 3: Using the Hard Drive❖3-3Downloading Fonts and MacrosThe Xerox DocuPrint NC60 PCL printer driver provides you wi

Downloading Fonts and Macros3-4❖DocuPrint NC60 System Administrator GuideFSDOWNLOADCommandThe FSDOWNLOAD command is used to download fonts or macros t

Downloading Fonts and MacrosChapter 3: Using the Hard Drive❖3-5Download MacroThe following is a sequence of commands that can be sent to the DocuPrint

Downloading Fonts and Macros3-6❖DocuPrint NC60 System Administrator GuideDownload FontsThe following is a sequence of commands that can be sent to the

Downloading Fonts and MacrosChapter 3: Using the Hard Drive❖3-7FSDELETE CommandThe FSDELETE command is used to delete files from the DocuPrint NC60 fi

Control Panel FeaturesChapter 1: Configuring the Printer❖1-7Menu Down ( )• If in the menu system, pressing this key causes the Control Panel to scroll

Using the Hard Disk Drive for Secure and Proof Jobs3-8❖DocuPrint NC60 System Administrator GuideUsing the Hard Disk Drive for Secure and Proof JobsSec

Using the Hard Disk Drive for Secure and Proof JobsChapter 3: Using the Hard Drive❖3-9Job names can be up to 16 alphanumeric characters and passwords

Using the Hard Disk Drive for Secure and Proof Jobs3-10❖DocuPrint NC60 System Administrator GuideCreating Proof JobsProof printing lets you print a si

Using the Hard Disk Drive for Secure and Proof JobsChapter 3: Using the Hard Drive❖3-11The job name is limited to 16 alphanumeric characters in the ra

Using the Hard Disk Drive for Secure and Proof Jobs3-12❖DocuPrint NC60 System Administrator GuidePrinting or DeletingSecure or Proof JobsSecure or pro

Chapter 4: Maintaining the Printer❖4-1Maintaining the Printer Chapter4Regular Printer Maintenance ... 4-3C

Maintaining the Printer4-2❖DocuPrint NC60 System Administrator GuideProcedure E ... 4

Regular Printer MaintenanceChapter 4: Maintaining the Printer❖4-3Regular Printer MaintenanceYour DocuPrint NC60 is designed to need very little ongoin

Cleaning the Printer4-4❖DocuPrint NC60 System Administrator GuideCleaning the PrinterThe cleaning procedures described in this section will help you m

Cleaning the PrinterChapter 4: Maintaining the Printer❖4-5Cleaning theGrounding Roller andFeed RollersThe interior rollers, located under the Front Co

Control Panel Features1-8❖DocuPrint NC60 System Administrator GuideItem Down ( )• If in the menu system, pressing this key causes the Control Panel to

Cleaning the Printer4-6❖DocuPrint NC60 System Administrator GuideFollow these steps to clean the rollers.1Raise the Front cover.2Locate the Print Drum

Cleaning the PrinterChapter 4: Maintaining the Printer❖4-77While holding the paper switch down, wipe all the rollers with a clean cloth. 8Clean the ar

Adjusting Density and Color Balance4-8❖DocuPrint NC60 System Administrator GuideAdjusting Density and Color BalanceYou may notice, over the course of

Adjusting Density and Color BalanceChapter 4: Maintaining the Printer❖4-9Printing a Test Page1Press Menu Up or Menu Down until you see:2Press Item Up

Adjusting Density and Color Balance4-10❖DocuPrint NC60 System Administrator GuideInterpreting theTest PrintThe Color Balance test print contains numbe

Adjusting Density and Color BalanceChapter 4: Maintaining the Printer❖4-11What To Look ForThere are basically three things to look for in examining th

Adjusting Density and Color Balance4-12❖DocuPrint NC60 System Administrator GuideMaking AdjustmentsUse the following procedures to make adjustments to

Adjusting Density and Color BalanceChapter 4: Maintaining the Printer❖4-13Black Density Adjustment1Press Item Up or Item Down until you see:2Press Val

Adjusting Density and Color Balance4-14❖DocuPrint NC60 System Administrator GuideColor Balance Adjustment1Press Menu Up or Menu Down until you see:2Pr

Adjusting Density and Color BalanceChapter 4: Maintaining the Printer❖4-15Adjustment RecoveryWhile in the color adjustment routine you have two method

Control Panel FeaturesChapter 1: Configuring the Printer❖1-9Value Down (-)• If in the menu system, and an item is displayed, pressing this key causes

Upgrading the Printer Software4-16❖DocuPrint NC60 System Administrator GuideUpgrading the Printer SoftwareThe Printer Controller is FLASH ROM equipped

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-17There are a variety of ways to upgrade the printer software. Choose one of the fo

Upgrading the Printer Software4-18❖DocuPrint NC60 System Administrator GuideUpgrade MethodsSelect a method from Table 4.3 to do an upgrade for your op

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-19Printer ControllerUpgrade ProcessDuring the upgrade process the printer’s Control

Upgrading the Printer Software4-20❖DocuPrint NC60 System Administrator GuideDetermining aSuccessful UpgradeIf your upgrade is successful, you will rec

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-21Procedure AUpgrade from CentreWare DP Once the upgrade process has begun do not p

Upgrading the Printer Software4-22❖DocuPrint NC60 System Administrator GuideProcedure BLPR Upgrade ProcedureOnce the upgrade process has begun do not

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-23If you have problems:• Try to ping the printer to make sure it has a valid ip add

Upgrading the Printer Software4-24❖DocuPrint NC60 System Administrator GuideProcedure CThe Parallel PortOnce the upgrade process has begun do not powe

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-25If you have problems:• Make sure you are using an IEEE B1284 compliant cable. • M

Navigating the Menu System1-10❖DocuPrint NC60 System Administrator GuideNavigating the Menu SystemThe Control Panel contains two menu structures.1. Ma

Upgrading the Printer Software4-26❖DocuPrint NC60 System Administrator GuideProcedure DInsert into Novell QueueOnce the upgrade process has begun do n

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-27If you have problems:If the printer never goes to “Processing” check the status o

Upgrading the Printer Software4-28❖DocuPrint NC60 System Administrator GuideProcedure EMACINTOSH – XEROX PRINTER UTILITY Once the upgrade process has

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-29Procedure FUpgrade Procedure via Internet ServicesOnce the upgrade process has be

Upgrading the Printer Software4-30❖DocuPrint NC60 System Administrator GuideIf you have problems:• If having problems with time-outs when sending the

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-31Procedure GMail SendOnce the upgrade process has begun do not power off your prin

Upgrading the Printer Software4-32❖DocuPrint NC60 System Administrator GuideGeneralTroubleshootingSome of the individual printer upgrade methods will

Upgrading the Printer SoftwareChapter 4: Maintaining the Printer❖4-336Power off and on. Send the file again using the same method.7Power off and on. S

4-34❖DocuPrint NC60 System Administrator Guide

Chapter 5: Troubleshooting❖5-1Troubleshooting Chapter5Control Panel Messages ... 5-2

Navigating the Menu SystemChapter 1: Configuring the Printer❖1-112. Reset Menu and its functions.— Factory Defaults—Network Defaults— CRU Resets—Resta

Control Panel Messages5-2❖DocuPrint NC60 System Administrator GuideControl Panel MessagesListed in Table 5.1 are Control Panel messages that either:•

Control Panel MessagesChapter 5: Troubleshooting❖5-3E8-OUTPUT JAMOPEN PRINTERPaper jam in the output roller area. Open printer, open the Fuser cover,

Control Panel Messages5-4❖DocuPrint NC60 System Administrator GuideFEED 8.5x13IN MANUAL BYPASSLoad 81/2 x 13 in. paper in manual bypass.FEED 8x10 PAPE

Control Panel MessagesChapter 5: Troubleshooting❖5-5FEED SP. FOLIOIN MANUAL BYPASSLoad Sp. Folio (216 x 315 mm) paper in manual bypass.FLUSHINGjob fil

Control Panel Messages5-6❖DocuPrint NC60 System Administrator GuideJ8-REPLACEPRINT DRUMJ8 - Replace the print drum.J9-REPLACEFUSER MODULEJ9 - Replace

Control Panel MessagesChapter 5: Troubleshooting❖5-7LOAD A5 PAPERIN TRAY 2Load A5 (148 x 210 mm) paper in tray 2.LOAD B5 PAPERIN TRAY 1Load B5 (176 x

Control Panel Messages5-8❖DocuPrint NC60 System Administrator GuideOFF LINEPress On Line button to return to “Ready.”PLEASE WAITWARMING UPPlease wait

Control Panel MessagesChapter 5: Troubleshooting❖5-9U1-RAM ERRORPOWER OFF/ONThere is a print engine RAM fault. Power the printer off and on. If the fa

5-10❖DocuPrint NC60 System Administrator Guide

Index IXDocuPrint NC60 System Administrator GuideAAppSocket Binary PSSettingIn Ethernet Menu•1-63In Token Ring Menu•1-75AppSocket EnableSettingIn Ethe

Navigating the Menu System1-12❖DocuPrint NC60 System Administrator GuideMenu SymbolsTwo menu symbols (= and *) are used to furnish information about m

DDocuPrint NC60 System Administrator GuideColor Adjust MenuHierarchy•1-42ItemsBlack Density•1-43Cancel Changes•1-44Color Balance•1-44Color Defaults•1-

FDocuPrint NC60 System Administrator GuideEtherTalk EnableSetting•1-63FFactory DefaultsResetting to•1-110Fast BlackSetting•1-48Fault HistoryDisplaying

MDocuPrint NC60 System Administrator GuideLPR BannerSettingIn Ethernet Menu•1-59In Token Ring Menu•1-71LPR Binary PSSettingIn Ethernet Menu•1-60In Tok

PDocuPrint NC60 System Administrator GuidePage PolicySetting•1-37PaperSpecifying size of•1-36Specifying type of•1-36Paper SizeSetting•1-36Paper TypeSe

RDocuPrint NC60 System Administrator GuidePrint QuantitySetting•1-39Setting for internal page printing•1-95Setting for Media Server printing•1-97Setti

TDocuPrint NC60 System Administrator GuideSystem MenuHierarchy•1-34ItemsDefaults•1-41Hold Timeout•1-38Language•1-35Manual Timeout•1-39Page Policy•1-37

DocuPrint NC60 System Administrator Guide

Navigating the Menu SystemChapter 1: Configuring the Printer❖1-13Setting aMenu OptionTo set an option or to invoke a function, follow the steps below:

Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or her

Navigating the Menu System1-14❖DocuPrint NC60 System Administrator Guide3Press Value Up or Value Down to select the appropriate value for this item. Y

Navigating the Menu SystemChapter 1: Configuring the Printer❖1-15Access to SpecialOperating ModesThe printer may be placed in special diagnostic or ot

Navigating the Menu System1-16❖DocuPrint NC60 System Administrator GuideControl Panel LocksSome of the menus in the Control Panel may be “locked” to p

Main MenuChapter 1: Configuring the Printer❖1-17Main MenuThe Main Menu is a system of submenus, each containing options designed to configure the prin

Main Menu1-18❖DocuPrint NC60 System Administrator GuideTable 1.5 Main Menu hierarchyMain MenuHierarchy and Factory SettingsJob MenuSee “Job Menu” (pag

Job MenuChapter 1: Configuring the Printer❖1-19Job MenuUse the Job Menu to cancel the job currently being processed, force a form feed on a partially

Job Menu1-20❖DocuPrint NC60 System Administrator GuideTable 1.6 Job Menu functionsMenu Item and Function Keystrokes Display ReadsCancel JobCancel the

Job MenuChapter 1: Configuring the Printer❖1-21Restart PrinterReinitialize the printer as if the power was cycled, but bypassing power on diagnostics.

Password Menu1-22❖DocuPrint NC60 System Administrator GuidePassword MenuUse the Password Menu (available only when the optional Hard Drive is installe

Password MenuChapter 1: Configuring the Printer❖1-23Table 1.7 Password Menu functionsMenu Item and Function Keystrokes Display ReadsAll JobsPrintPrint

Contents iDocuPrint NC60 System Administrator Guide Chapter 1Configuring the Printer ... 1-1Control Panel Fea

Password Menu1-24❖DocuPrint NC60 System Administrator GuideAll JobsDeleteDelete all jobs sent with a specific password.1. Press Menu Up or Menu Down u

Tray MenuChapter 1: Configuring the Printer❖1-25Tray MenuUse the Tray Menu to configure tray settings for both PostScript and PCL jobs. The menu hiera

Tray Menu1-26❖DocuPrint NC60 System Administrator GuideTable 1.8 Tray Menu functionsMenu Item and Function Keystrokes Display ReadsTray1 Cust. SizeDef

Tray MenuChapter 1: Configuring the Printer❖1-27Tray1 TypeDefine the type of paper installed in Tray 1.The available values are:Plain*TransparencyBond

Tray Menu1-28❖DocuPrint NC60 System Administrator GuideTray SequenceDefine the order in which trays are used when more than one tray meets the size an

PCL MenuChapter 1: Configuring the Printer❖1-29PCL MenuUse the PCL Menu to establish the default configuration for the printer when printing PCL jobs.

PCL Menu1-30❖DocuPrint NC60 System Administrator GuideTable 1.9 PCL Menu functionsMenu Item and Function Keystrokes Display ReadsFont NumberSet the ID

PCL MenuChapter 1: Configuring the Printer❖1-31Point SizeSet the point size when the font selected is a scaleable font. Point size is measured in part

PCL Menu1-32❖DocuPrint NC60 System Administrator GuideOrientationSet the default orientation used in PCL.The available values are:Portrait*Landscape1.

PCL MenuChapter 1: Configuring the Printer❖1-33Line TerminationSet to add a Carriage Return after every Line Feed appearing in PCL text.The available

DocuPrint NC60 System Administrator GuideParallel Menu ... 1-50Serial Menu...

System Menu1-34❖DocuPrint NC60 System Administrator GuideSystem MenuUse the System Menu to set general printer features. The menu hierarchy is shown i

System MenuChapter 1: Configuring the Printer❖1-35Table 1.10 System Menu functionsMenu Item and Function Keystrokes DisplayLanguageSet the spoken lang

System Menu1-36❖DocuPrint NC60 System Administrator GuidePaper SizeSet the default paper size used in PostScript and PCL.The available values are:Stat

System MenuChapter 1: Configuring the Printer❖1-37Page PolicyAllow the printer to automatically select an alternate paper size and/or type if the requ

System Menu1-38❖DocuPrint NC60 System Administrator GuidePolicy TimeoutSet how long the printer will wait before taking the action defined by the sett

System MenuChapter 1: Configuring the Printer❖1-39Manual TimeoutSet time to force printing of a job designated by the print driver to use media fed fr

System Menu1-40❖DocuPrint NC60 System Administrator GuideStartup PageSet to determine if a special startup page shall be printed at each power on.The

System MenuChapter 1: Configuring the Printer❖1-41DefaultsSets default units. This is not changed when a “Factory Default” is performed. The available

Color Adjust Menu1-42❖DocuPrint NC60 System Administrator GuideColor Adjust MenuUse the Color Adjust Menu to control and adjust color density, black d

Color Adjust MenuChapter 1: Configuring the Printer❖1-43Table 1.11 Color Adjust Menu functionsMenu Item and Function Keystrokes DisplayColor DensitySe

DocuPrint NC60 System Administrator GuideAdjusting Density and Color Balance... 4-8Printing a Test Page ...

Color Adjust Menu1-44❖DocuPrint NC60 System Administrator GuideColor BalanceSet to allow fine adjustment to the color balance.The available values are

Color Adjust MenuChapter 1: Configuring the Printer❖1-45Color DefaultsSet to allow “resetting” all color adjustment (Color Density, Black Density, and

Imaging Menu1-46❖DocuPrint NC60 System Administrator GuideImaging MenuUse the Imaging Menu to set imaging features as printer defaults. The menu hiera

Imaging MenuChapter 1: Configuring the Printer❖1-47Table 1.12 Imaging Menu functionsMenu Item and Function Keystrokes DisplayEdge SmoothingSet the def

Imaging Menu1-48❖DocuPrint NC60 System Administrator GuideHalftone TypeSet the halftoning method.The available values are:Quad DotSmooth Screen*1200 Q

Imaging MenuChapter 1: Configuring the Printer❖1-49Process BlackSet to select process black operation.The available values are:OnOff*1. Press Menu Up

Parallel Menu1-50❖DocuPrint NC60 System Administrator GuideParallel MenuUse the Parallel Menu to set options for the parallel port connection. The men

Parallel MenuChapter 1: Configuring the Printer❖1-51Table 1.13 Parallel Menu functionsMenu Item and Function Keystrokes DisplayPort EnableEnable or di

Parallel Menu1-52❖DocuPrint NC60 System Administrator GuideParallel PDLSet the default emulation for the parallel port.The available values are:Auto*P

Serial MenuChapter 1: Configuring the Printer❖1-53Serial MenuUse the Serial Menu to set options for the serial port connection. The menu hierarchy is

DocuPrint NC60 System Administrator Guide

Serial Menu1-54❖DocuPrint NC60 System Administrator GuideTable 1.14 Serial Menu functionsMenu Item and Function Keystrokes DisplayPort EnableEnable or

Serial MenuChapter 1: Configuring the Printer❖1-55Serial PDLSet the default emulation for the serial port.The available values are:Auto*PCLPostscript1

Serial Menu1-56❖DocuPrint NC60 System Administrator GuideBaud RateSet the baud rate for the serial port.The available values are:3840028800192009600*4

Ethernet MenuChapter 1: Configuring the Printer❖1-57Ethernet MenuUse the Ethernet Menu to set options for the Ethernet port. The menu hierarchy is sho

Ethernet Menu1-58❖DocuPrint NC60 System Administrator GuideFigure 1.11 Ethernet Menu hierarchyLPR EnableOn*OffLPR PDLJob MenuPassword MenuTray MenuPCL

Ethernet MenuChapter 1: Configuring the Printer❖1-59Table 1.15 Ethernet Menu functionsMenu Item and Function Keystrokes DisplayLPR EnableEnable or dis

Ethernet Menu1-60❖DocuPrint NC60 System Administrator GuideLPR Binary PSEnable or disable the LPR binary mode of PostScript.The available values are:O

Ethernet MenuChapter 1: Configuring the Printer❖1-61DLC/LLC Bin PSEnable or disable the DLC/LLC binary mode of PostScript.The available values are:OnO

Ethernet Menu1-62❖DocuPrint NC60 System Administrator GuideNetBEUI Bin PSEnable or disable the NetBEUI binary mode of PostScript.The available values

Ethernet MenuChapter 1: Configuring the Printer❖1-63AppSocket Bin PSEnable or disable the AppSocket binary mode of PostScript.The available values are

Chapter 1: Configuring the Printer❖1-1Configuring the Printer Chapter1Control Panel Features ...

Ethernet Menu1-64❖DocuPrint NC60 System Administrator GuideIP Address Res.Set the method used to assign the IP address, including subnet mask and defa

Ethernet MenuChapter 1: Configuring the Printer❖1-65IP AddressSet the four byte IP address.The available values are:xxx.xxx.xxx.xxx(where xxx = 000 to

Ethernet Menu1-66❖DocuPrint NC60 System Administrator GuideSubnet MaskSet the four byte Subnet Mask address.The available values are:xxx.xxx.xxx.xxx(w

Ethernet MenuChapter 1: Configuring the Printer❖1-67Default GatewaySet the four byte Default Gateway address.The available values are:xxx.xxx.xxx.xxx(

Ethernet Menu1-68❖DocuPrint NC60 System Administrator GuidePort TimeoutSet the time for determining when to end an incomplete print job and poll the n

Token Ring MenuChapter 1: Configuring the Printer❖1-69Token Ring MenuUse the Token Ring Menu to set options for the Token Ring port. The menu hierarch

Token Ring Menu1-70❖DocuPrint NC60 System Administrator GuideFigure 1.12 Token Ring Menu hierarchyLPR EnableOn*OffLPR PDLJob MenuPassword MenuTray Men

Token Ring MenuChapter 1: Configuring the Printer❖1-71Table 1.16 Token Ring Menu functionsMenu Item and Function Keystrokes DisplayLPR EnableEnable or

Token Ring Menu1-72❖DocuPrint NC60 System Administrator GuideLPR Binary PSEnable or disable the LPR binary mode of PostScript.The available values are

Token Ring MenuChapter 1: Configuring the Printer❖1-73DLC/LLC Bin PSEnable or disable the DLC/LLC binary mode of PostScript.The available values are:O

Control Panel Features1-2❖DocuPrint NC60 System Administrator GuideControl Panel FeaturesThe DocuPrint NC60 Control Panel (Figure 1.1) serves two purp

Token Ring Menu1-74❖DocuPrint NC60 System Administrator GuideNetBEUI Bin PSEnable or disable the NetBEUI binary mode of PostScript.The available value

Token Ring MenuChapter 1: Configuring the Printer❖1-75AppSocket Bin PSEnable or disable the AppSocket binary mode of PostScript.The available values a

Token Ring Menu1-76❖DocuPrint NC60 System Administrator GuideIP Address Res.Set the method used to assign the IP address, including subnet mask and de

Token Ring MenuChapter 1: Configuring the Printer❖1-77IP AddressSet the four byte IP address.The available values are:xxx.xxx.xxx.xxx(where xxx = 000

Token Ring Menu1-78❖DocuPrint NC60 System Administrator GuideSubnet MaskSet the four byte Subnet Mask address.The available values are:xxx.xxx.xxx.xxx

Token Ring MenuChapter 1: Configuring the Printer❖1-79Default GatewaySet the four byte Default Gateway address.The available values are:xxx.xxx.xxx.xx

Token Ring Menu1-80❖DocuPrint NC60 System Administrator GuidePort TimeoutSet the time for determining when to end an incomplete print job and poll the

Token Ring MenuChapter 1: Configuring the Printer❖1-81LAASet the six byte Locally Administered Address.The valid values are:xxxx xxxx xxxx(where xxxx

Token Ring Menu1-82❖DocuPrint NC60 System Administrator GuideSource RoutingSelect the Source Routing option.The available values are:On*Off1. Press Me

Novell MenuChapter 1: Configuring the Printer❖1-83Novell MenuUse the Novell Menu to modify Novell parameters. The menu hierarchy is shown in Figure 1.

Control Panel FeaturesChapter 1: Configuring the Printer❖1-3The DisplayThe Control Panel's display performs two functions.• It informs you of pri

Novell Menu1-84❖DocuPrint NC60 System Administrator GuideTable 1.17 Novell Menu functionsMenu Item and Function Keystrokes DisplayNovell EnableEnable

Novell MenuChapter 1: Configuring the Printer❖1-85Novell Binary PSEnable or disable the Novell binary mode of PostScript.The available values are:OnOf

Novell Menu1-86❖DocuPrint NC60 System Administrator GuideFrame TypeSets the frame type used for the Novell protocol.The available values are:Auto*802.

Novell MenuChapter 1: Configuring the Printer❖1-87PServer NameSet the name of the PServer in this printer (a name of 1 to 47 characters in length).The

Novell Menu1-88❖DocuPrint NC60 System Administrator GuidePrimary ServerSet the name of the Primary file server (a name of 1 to 47 characters in length

Novell MenuChapter 1: Configuring the Printer❖1-89NDS TreeSet the NDS Tree character string (from 1 to 64 characters in length).The available values a

Novell Menu1-90❖DocuPrint NC60 System Administrator GuideNDS ContextSet the NDS context string (from 1 to 255 characters in length).The available valu

Print MenuChapter 1: Configuring the Printer❖1-91Print MenuUse the Print Menu to print internal files or files downloaded to the printer’s hard disk d

Print Menu1-92❖DocuPrint NC60 System Administrator GuideTable 1.18 Print Menu functionsMenu Item and Function Keystrokes DisplayStartup PagePrint a St

Print MenuChapter 1: Configuring the Printer❖1-93PS Font ListPrint the list of the fonts available in PostScript, including resident fonts and fonts s