3D Innovations NC60 User Manual download pdf (Page 131)

Using the Hard Disk Drive for Secure and Proof Jobs

Chapter 3: Using the Hard Drive

❖

3-9

Job names can be up to 16 alphanumeric characters and

passwords must contain four numeric characters (0-7).

PCL does not support leading zeros in the password. The

printer assigns a default job name if no name or a name

with a syntax error is used. The job name is displayed on

the Control Panel Password Menu when the associated

password is entered. If a password is not assigned or the

password contains syntax errors, the job is not printed

and is discarded.

The following example creates a Secure Job named

“Bond” with a password of 7000:

<ESC>%-12345X@PJL XSECUREJOB

@PJL XJOBPASSWORD = 7000

@PJL JOB NAME = "Bond"

@PJL ENTER LANGUAGE = PCL

...PCL file...

<ESC>%-012345X@PJL EOJ

<ESC>%-012345X

The printer processes all data following the @PJL ENTER

LANGUAGE = PCL command as part of the Secure Job

named “Bond.” The job is stored on the hard disk under

the name “Bond” with a password of “7000” as defined in

the @PJL XJOBPASSWORD command. The @PJL EOJ

command signifies the end of the secure job. The EOJ

command should be followed by a UEL command.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 185 186

No comments

3D Innovations NC60 User Manual Page 131