3D Innovations NC60 User Manual download pdf (Page 18)

Navigating the Menu System

1-12

❖

DocuPrint NC60 System Administrator Guide

Menu Symbols

Two menu symbols (= and *) are used to furnish

information about menus and settings. The purpose of

each symbol is described in Table 1.3 below.

Table 1.3 Symbols found in the Control Panel Menu systems

Symbol Purpose Example

When at a point where a value may be changed, the item

name is displayed on the top line with the

symbol in the last

character position, and the selected value is displayed on the

bottom line.

The example at the right tells you that Language is an option

that takes a specific setting. One setting for the Language

option is Français. Another setting is English. (The list of

available settings is displayed one setting at a time on the

bottom line of the display as you press

Value Up

Value

Down

Language =

Français

When first arriving at a point where a setting may be changed,

the current value is displayed on the bottom line and a

symbol appears next to it in the last character position. Pressing

Up Value or Down Value scrolls through the possible values.

Whenever the current value is displayed, the

is displayed in

the last character position. Pressing Enter causes the

display in the last character position for the new value. Since

pressing Enter causes the display to indicate the current menu

and current item, the asterisk may not be seen until the item

and current value is displayed again by pressing a Value key.

The example at the right tells you that Language is currently set

to English.

Language =

English *

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 185 186

No comments

3D Innovations NC60 User Manual Page 18