3D Innovations NC60 User Manual download pdf (Page 127)

Downloading Fonts and Macros

Chapter 3: Using the Hard Drive

❖

3-5

Download Macro

The following is a sequence of commands that can be sent

to the DocuPrint NC60 to download a macro to the disk.

In this example:

• <ESC>%-12345X is the PJL UEL command which starts

this sequence.

• @PJL<CR><LF> is the mandatory PJL command

following the UEL command.

• @PJL FSDOWNLOAD... downloads a macro of 29 bytes

named “a_macro.”

• The phrase “This is the macro” is positioned at x=900

and y=1500 by this macro.

• <ESC>%-12345X is the UEL command which ends this

sequence.

Executing this macro requires the following PCL

sequence:

Notes:

1. The macro ID must be the same case as in the original

download command.

2. The byte count (after the “n” and before the “w”)

must equal the ID byte count plus 1.

@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\macros\a_macro” SIZE=29<CR><LF>

<ESC>*p900x1500YThis is the macro <ESC>%-12345X

<ESC>&n8W<HEX’04’>a_macro<CR,LF> Sets the current macro ID to the

string ID “a_macro”

<ESC>&n8W<HEX’05’>a_macro<CR,LF> Associates the current macro ID with

the supplied string ID

<ESC>&f<HEX’02’>x<CR,LF> Executes this macro

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 185 186

No comments

3D Innovations NC60 User Manual Page 127